Holding tank controlled by a Microcontroller 8051
press P key to power on the system
tank is filled to the set point value
after 5 seconds begins to empty
the pot controls the flow speed
source file
  1. Holding tank controlled by a Microcontroller 8051
  2. press P key to power on the system
  3. tank is filled to the set point value
  4. after 5 seconds begins to empty
  5. the pot controls the flow speed
  6. source file

Holding tank controlled by a Microcontroller 8051

0 Credits

529bea80-7df6-4a76-90ba-0e373c508a5a.rar

Login for download
Category:

Description

In this SPICE simulation an holding tank is controlled by a an 8051 MCU. Once the system is powered on (press the P key) and set to run (press the R key), the tank will fill to the Set Point value. Once the volume reaches the Set Point, the flow will stop. The tank holds the liquid for a time equal to 5 seconds, then drains, and shuts off once empty.

  • Free
  • Intermediate
  • <10
  • NI Multisim
  • 11+
  • Yes
  • press P key to power on the system tank is filled to the set point value after 5 seconds begins to empty the pot controls the flow speed source file

Related products