simulation of switch circuit

Home Forums Photovoltaic Circuits simulation of switch circuit

  • This topic is empty.
Viewing 3 posts - 1 through 3 (of 3 total)
  • Author
    Posts
  • #16283
    sogh1668
    Member
    Credits: 0

    hi

    I need some simulation circuit like this png file model to comparing switching speed of variuse model

    thanks

    #16377
    mirko82
    Member
    Credits: 0

    Hi sogh1668, I’d like to have more info. the Vdc of the DC-DC boost converter, I guess is the output of a photovoltaic panel. what is this voltage to step up?  And the output Voltage? (battery voltage)

    #16378
    mirko82
    Member
    Credits: 0

    This is a 480Watt power boost converter PSpice example. I set a 18V input from the photovoltaic panel and a 48V output.It provides about 10A on a 5 Ohm load. The frequency is 20khz, and the Duty cycle is 0.7 as you can see from the pulse image attached.With this data, the minimum Inductance to use is a 7.5 uH to ensure a continuos condition mode. In the other image you can see the discontinuous mode of the inductor current using a 4uH inductance.For the choice of IGBT pay attentiont to the Ic-Vce characteristic varying the Vge value, and the maximum current that it can provide.In this example an MG75 would be more correct but I don’t have the spice model.for higher frequencies I’d use a power mosfet.

     

     

    Attachments:
    You must be logged in to view attached files.
Viewing 3 posts - 1 through 3 (of 3 total)
  • You must be logged in to reply to this topic.