Now let ‘s select the resistors and place them
![](https://youspice.com/wp-content/uploads/2015/01/selectresistors_227781950290652786.png)
![](https://youspice.com/wp-content/uploads/2015/01/placeresistors_5828557431637486225.png)
Select the Zener diode 1N3016A
![](https://youspice.com/wp-content/uploads/2015/01/selectzener_8323778820166546867.png)
From the browser, select the DC voltage source and ground reference
![](https://youspice.com/wp-content/uploads/2015/01/selectvoltagegenerator_6334500264160977790.png)
![](https://youspice.com/wp-content/uploads/2015/01/selectground_7120504217821144518.png)
To change the label of device, select “Component Properties”
![](https://youspice.com/wp-content/uploads/2015/01/selectcomponentproperties_8652316470317134424.png)
Click on it and change the label
![](https://youspice.com/wp-content/uploads/2015/01/changelabel_2197010530264627415.png)
Select “Relocate component” and relocate the label
![](https://youspice.com/wp-content/uploads/2015/01/relocatecomponent_2484026564761711122.png)
![](https://youspice.com/wp-content/uploads/2015/01/relocatelabel_1726422743657058021.png)
Repeat this process for all the components and labels, and you’ll get this result:
![](https://youspice.com/wp-content/uploads/2015/01/allcomponentplaced_139444765058309821.png)